Switch Cisco 3750x 48T-S V05 - 48 Bocas

Switch Cisco 3750x 48T - 48 Bocas
  • Item: 19601
  • Marca: Cisco
  • Producto: Usado

Precio:  $5000.00


Total 10/100/1000 Ethernet Ports 48

Modular 4 x 1 GE, 2 x 10 GE, 2 x 10GB-T,
and Service Module with two 10 GE SFP + Interfaces

Default AC Power Supply Rating with Dual Modular Slots 350W
Default Power over Ethernet (PoE) Power -




Explanation in Detail
In general, Cisco switches? models are started with WS-. WS-C means the switch products and the products with WS-X begining refer to the engines or modules of switches. In addition, there is WS-G which means the Gigabit fiber optic transceiver modules of switches. Now, I explain the detailed meaning of each letter in the model through a few of examples.
eg. WS-C3560G-24TS-S

  • W ? stands for IPSEC 40bit encryption;
  • S ? means switchboard;
  • C ? means the fixed-configuration switch;
  • 3650 ? refers to the seires;
  • G ? means all the interfaces are supported Gigabit or more. If there is no letter ?G? here, it shows that the mainly port of this switch is 10/100M or 100M;
  • 24 ? here means there are 24 ports of this switch;
  • T ? stands for port of BaseT port; sometimes, there is letter ?P? here which means BaseT port which supports PoE at the same time;
  • S ? the S behind T means the extended interface is SFP type interface and uplink;

Note: There are also ?D? or ?C? or ?W?repalcing ?T? or ?S? here, which respectively means 10Gigabit Ethernet XENPAK port and uplink, T/SPF and uplink, Integrated wireless LAN controller(50 support for up to 50 access points). Some combination meaning as following:
TT ? common port and uplink port are both BaseT;
LC ? common port is BaseT and partially support PoE(4 ports) uplink port are BaseT/SFP;
PC ? common port is BaseT and all support PoE(24 ports) uplink port are BaseT/SFP;
TC ?common port is BaseT and uplink port are all BaseT/SFP;
TS ? common port is BaseT and uplink port are all SFP;
PS ? common port is BaseT and all support the PoE, uplink port are all SFP;
FS ? common port is 100BaseFX and uplink port are all SFP;
when there is only T, it means there is no uplink port in the switch.