Switch Cisco 3750e 48T - 48 Bocas

Switch Cisco 3750e 48T - 48 Bocas
  • Item: 19594
  • Marca: Cisco
  • Producto: Usado

Precio:  $8000.00

Consultar

Explanation in Detail
In general, Cisco switches’ models are started with WS-. WS-C means the switch products and the products with WS-X begining refer to the engines or modules of switches. In addition, there is WS-G which means the Gigabit fiber optic transceiver modules of switches. Now, I explain the detailed meaning of each letter in the model through a few of examples.
eg. WS-C3560G-24TS-S

  • W — stands for IPSEC 40bit encryption;
  • S — means switchboard;
  • C — means the fixed-configuration switch;
  • 3650 — refers to the seires;
  • G — means all the interfaces are supported Gigabit or more. If there is no letter “G” here, it shows that the mainly port of this switch is 10/100M or 100M;
  • 24 — here means there are 24 ports of this switch;
  • T — stands for port of BaseT port; sometimes, there is letter “P” here which means BaseT port which supports PoE at the same time;
  • S — the S behind T means the extended interface is SFP type interface and uplink;

Note: There are also “D” or “C” or “W”repalcing “T” or “S” here, which respectively means 10Gigabit Ethernet XENPAK port and uplink, T/SPF and uplink, Integrated wireless LAN controller(50 support for up to 50 access points). Some combination meaning as following:
TT — common port and uplink port are both BaseT;
LC — common port is BaseT and partially support PoE(4 ports) uplink port are BaseT/SFP;
PC — common port is BaseT and all support PoE(24 ports) uplink port are BaseT/SFP;
TC –common port is BaseT and uplink port are all BaseT/SFP;
TS — common port is BaseT and uplink port are all SFP;
PS — common port is BaseT and all support the PoE, uplink port are all SFP;
FS — common port is 100BaseFX and uplink port are all SFP;
when there is only T, it means there is no uplink port in the switch.

 

 

Cisco Catalyst 3560-E Series Switches

Cisco® Catalyst® 3560-E Series is (Figure 1) an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with 10 Gigabit Ethernet uplinks, the Cisco Catalyst 3560-E Series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video. Cisco Catalyst 3560-E Series aggregation switches deliver secure nonstop unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.

Cisco Catalyst 3560-E Series Primary Features

• Cisco TwinGig converter module for migrating uplinks from Gigabit Ethernet to 10 Gigabit Ethernet

• Cisco EnergyWise for greenhouse gas emissions and operational cost optimization by measuring, reporting, and reducing energy consumption across the entire corporate infrastructure, well beyond the scope of IT.

• PoE configurations with 15.4W of PoE on all 48 ports

• Enhanced PoE supporting up to 20W of PoE per port

• Industry first portfolio to scale beyond 15.4W per port delivering maximum solution simplicity for 802.11n access point deployments

• Access switch models have modular fan and power supply with externally available backup

• Dual redundant modular power supplies and fans for Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD aggregation switches for nonstop operation

• Multicast routing, IPv6 routing, and access control list (ACL) in hardware

• Out-of-band Ethernet management port along with RS-232 console port



Comentarios