Switch Cisco Ws-C3550-24

switch cisco Ws-C3550-24
  • Item: 19151
  • Marca: Cisco
  • Producto: Usado

Precio:  $1000.00

Consultar

  • Especificaciones rápidas:
  • Catalizador 3550 Series
    24 Puertos
    10/100
    1.6 Gbps de rendimiento a través de Fast EtherChannel
    16 Gbps de rendimiento a través de Gigabit EtherChannel
    Ofrece hasta 15 vatios de energía por puerto
    SMI ( Estándar de múltiples capas de imagen)
    2 puertos ( Gigabit Interface Converter) integrado GBIC
    RPS Ready

 

 

Explanation in Detail
In general, Cisco switches’ models are started with WS-. WS-C means the switch products and the products with WS-X begining refer to the engines or modules of switches. In addition, there is WS-G which means the Gigabit fiber optic transceiver modules of switches. Now, I explain the detailed meaning of each letter in the model through a few of examples.
eg. WS-C3560G-24TS-S

  • W — stands for IPSEC 40bit encryption;
  • S — means switchboard;
  • C — means the fixed-configuration switch;
  • 3650 — refers to the seires;
  • G — means all the interfaces are supported Gigabit or more. If there is no letter “G” here, it shows that the mainly port of this switch is 10/100M or 100M;
  • 24 — here means there are 24 ports of this switch;
  • T — stands for port of BaseT port; sometimes, there is letter “P” here which means BaseT port which supports PoE at the same time;
  • S — the S behind T means the extended interface is SFP type interface and uplink;

Note: There are also “D” or “C” or “W”repalcing “T” or “S” here, which respectively means 10Gigabit Ethernet XENPAK port and uplink, T/SPF and uplink, Integrated wireless LAN controller(50 support for up to 50 access points). Some combination meaning as following:
TT — common port and uplink port are both BaseT;
LC — common port is BaseT and partially support PoE(4 ports) uplink port are BaseT/SFP;
PC — common port is BaseT and all support PoE(24 ports) uplink port are BaseT/SFP;
TC –common port is BaseT and uplink port are all BaseT/SFP;
TS — common port is BaseT and uplink port are all SFP;
PS — common port is BaseT and all support the PoE, uplink port are all SFP;
FS — common port is 100BaseFX and uplink port are all SFP;
when there is only T, it means there is no uplink port in the switch.



Comentarios